Fastening Technology

ARC Studs

Tapped Reduced Base

Imperial thread:


Diameter
"D"
Minimum
Length
"L"
Tap
Length
"TL"
Tap
Diameter
"TD"
Fillet
Height*
"FH"
Fillet
Diameter*
"FD"
Est.
Burn*
Off
1/43/41/28-32.111.250.125
5/1615/810-24.125.312.125
3/815/81/4-20.141.375.125
7/1615/85/16-18156.437.125
1/21-5/85/83/8-16.172.500.125
5/81-5/85/87/16-14.266.625.187
3/41-3/43/41/2-13.335.750.187
7/823/45/8-11.390.875.187
133/43/4-10.4681.250
* Approximate values
Other sizes available.
Contact us if you have a special requirement.

Metric thread:


Diameter
"D"
Minimum
Length
"L"
Tap
Length
"TL"
Tap
Diameter
"TD"
Fillet
Height*
"FH"
Fillet
Diameter*
"FD"
Est.
Burn*
Off
.27520mm8mmM4-73.0 +/-1.09.02.0
.31225mm8mmM6-13.0 +/-1.09.53.0
.37525mm8mmM8-1.253.2 +/- 1.012.03.0
.50030mm10mmM10-1.253.9 +/- 1.013.03.0
.62540mm10mmM12-1.754.8 +/- 1.018.54.7
.75050mm12mmM16-2.04.8 +/- 1.022.04.7
* Approximate values
Other sizes available.
Contact us if you have a special requirement.

Material

 Low Carbon SteelStainless Steel
Material:ASTM A108
C1010-C1020
C-0.23% max; P-0.04% max
MN-0.90% max; S-0.05% max
ASTM A276

302HQ/304/304L STANDARD
18-8
Mechanical
Properties:
Min. Tensile Type A .....61,000 psi (420 Mpa)
Min. Yield Type
A .....49,000 psi (340 MPa)
Min. Tensile Type
B .....65,000 psi (450 MPa)
Min. Yield Type
B .....51,000 psi (340 MPa)
Other Grades Available Upon Request
Plating: Available As Special RequestPlating Does Not Apply To Stainless Steel
Annealing: Studs Are Annealed Where Required

DOWNLOADS

 

Data Sheet - Arc Studs - Tapped Reduced Base

Imperial Thread
 

Data Sheet - Arc Studs - Tapped Reduced Base

Metric Thread

Ferrules