Fastening Technology

ARC Studs

Reduced Base

Imperial thread:

Imperial
Thread
"D"
Base
Diameter
"BD"
Minimum
Length
"L"
Base
Length*
"BL"
Fillet
Height*
"FH"
Fillet
Diameter*
"FD"
Est.
Burn*
Off
1/4-20.187.750.375.111.250.125
5/16-18.272.750.375.125.312.125
3/8-16.312.750.390.141.375.125
7/16-14.375.750.437156.437.125
1/2-13.437.875.500.172.500.125
5/8-11.5001.125.625.266.625.187
3/4-10.6201.50.796.335.750.187
7/8-9.7501.50.859.390.875.187
1-8.8753.921.4681.250
* Approximate values
Other sizes available.
Contact us if you have a special requirement.

Metric thread:

Metric
Thread
"D"
Base
Diameter
"BD"
Minimum
Length
"L"
Base
Length*
"BL"
Fillet
Height*
"FH"
Fillet
Diameter*
"FD"
Est.
Burn*
Off
M6-1.254.518.05.03.0 +/-1.06.002.0
M8-1.256.220.06.93.0 +/-1.08.003.0
M10-1.507.920.08.83.2 +/- 1.010.003.0
M12-1.759.525.09.03.9 +/- 1.012.004.7
M16-2.013.235.013.54.8 +/- 1.016.004.7
* Approximate values
Other sizes available.
Contact us if you have a special requirement.

Material

 Low Carbon SteelStainless Steel
Material:ASTM A108
C1010-C1020
C-0.23% max; P-0.04% max
MN-0.90% max; S-0.05% max
ASTM A276

302HQ/304/304L STANDARD
18-8
Mechanical
Properties:
Min. Tensile Type A .....61,000 psi (420 Mpa)
Min. Yield Type
A .....49,000 psi (340 MPa)
Min. Tensile Type
B .....65,000 psi (450 MPa)
Min. Yield Type
B .....51,000 psi (340 MPa)
Other Grades Available Upon Request
Plating: Available As Special RequestPlating Does Not Apply To Stainless Steel
Annealing: Studs Are Annealed Where Required

DOWNLOADS

 

Data Sheet - Arc Studs - Reduced Base

Imperial Thread
 

Data Sheet - Arc Studs - Reduced Base

Metric Thread

Ferrules