Fastening Technology

ARC Studs

Partial Thread

Imperial thread:

Imperial
Thread
"D"
Base
Diameter
"BD"
Minimum
Length
"L"
Base
Length*
"BL"
Fillet
Height*
"FH"
Fillet
Diameter*
"FD"
Est.
Burn*
Off
1/4-20.215.750.375.093.281.125
5/16-18.275.750.375.109.359.125
3/8-16.330.750.390.109.437.125
7/16-14.437.750.437.125.500.125
1/2-13.446.875.500.156.578.125
5/8-11.5621.125.625.187.625.187
3/4-10.6801.50.796.250.796.187
7/8-9.7981.50.859.312.937.187
1-8.9133.0.921.3751.093.250
* Approximate values
Other sizes available.
Contact us if you have a special requirement.

Metric thread:

Metric
Thread
"D"
Base
Diameter
"BD"
Minimum
Length
"L"
Base
Length*
"BL"
Fillet
Height*
"FH"
Fillet
Diameter*
"FD"
Est.
Burn*
Off
M6-1.05.318MM9.53.0 +/-1.07.02.0
M8-1.257.1620MM9.53.0 +/-1.09.03.0
M10-1.508.9820MM10.03.2 +/- 1.010.403.0
M12-1.7510.8025MM12.03.9 +/- 1.012.304.7
M16-2.014.6035MM16.04.8 +/- 1.016.004.7
* Approximate values
Other sizes available.
Contact us if you have a special requirement.

Material

 Low Carbon SteelStainless Steel
Material:ASTM A108
C1010-C1020
C-0.23% max; P-0.04% max
MN-0.90% max; S-0.05% max
ASTM A276

302HQ/304/304L STANDARD
18-8
Mechanical
Properties:
Min. Tensile Type A .....61,000 psi (420 Mpa)
Min. Yield Type
A .....49,000 psi (340 MPa)
Min. Tensile Type
B .....65,000 psi (450 MPa)
Min. Yield Type
B .....51,000 psi (340 MPa)
Other Grades Available Upon Request
Plating: Available As Special RequestPlating Does Not Apply To Stainless Steel
Annealing: Studs Are Annealed Where Required

DOWNLOADS

 

Data Sheet - Arc Studs - Partial Thread

Imperial Thread
 

Data Sheet - Arc Studs - Partial Thread

Metric Thread

Ferrules