Fastening Technology

ARC Studs

Headed Anchor

Imperial
Diameter
"D"
Metric
Diameter
"D'
Minimum
Length
"L"
Head
Diameter
"HD"
Head
Thickness
"HT"
Burn Of
Flat
1/46mm1.125.500.187.125
3/810mm1.375.750.281.125
1/213mm1.6251.312.125
5/816mm1.4371.250.312.187
* Approximate values
Other sizes available.
Contact us if you have a special requirement.

Material

 Low Carbon SteelStainless Steel
Material:ASTM A108
C1010-C1020
C-0.23% max; P-0.04% max
MN-0.90% max; S-0.05% max
ASTM A276

302HQ/304/304L STANDARD
18-8
Mechanical
Properties:
Min. Tensile Type A .....61,000 psi (420 Mpa)
Min. Yield Type
A .....49,000 psi (340 MPa)
Min. Tensile Type
B .....65,000 psi (450 MPa)
Min. Yield Type
B .....51,000 psi (340 MPa)
Other Grades Available Upon Request
Plating: Available As Special RequestPlating Does Not Apply To Stainless Steel
Annealing: Studs Are Annealed Where Required

DOWNLOADS

 

Data Sheet - Arc Studs - Headed Anchor

Ferrules