Fastening Technology

ARC Studs

Eye Bolt

Imperial
Diameter
"D"
Minimum
Base
"BL"
Minimum
Oal
"L"
Inside
Diameter
"ID"

Gap
"G"
Burn Of
Flat
3/16.7501.750.500.187.093
1/4.7501.750.750.250.125
5/16.7504.875.750.312.125
3/812.625.875.375.125
7/161.12531.437.125
1/21.3753.6251.25.500.125
* Approximate values
Other sizes available.
Contact us if you have a special requirement.

Material

 Low Carbon SteelStainless Steel
Material:ASTM A108
C1010-C1020
C-0.23% max; P-0.04% max
MN-0.90% max; S-0.05% max
ASTM A276

302HQ/304/304L STANDARD
18-8
Mechanical
Properties:
Min. Tensile Type A .....61,000 psi (420 Mpa)
Min. Yield Type
A .....49,000 psi (340 MPa)
Min. Tensile Type
B .....65,000 psi (450 MPa)
Min. Yield Type
B .....51,000 psi (340 MPa)
Other Grades Available Upon Request
Plating: Available As Special RequestPlating Does Not Apply To Stainless Steel
Annealing: Studs Are Annealed Where Required

DOWNLOADS

 

Data Sheet - Arc Studs - Eye Bolt

Ferrules