Fastening Technology

ARC Studs

Bent No Thread


Diameter
Base
Diameter
"BD"
Minimum
Length
"L"
Minimum
Bend
"X"
Fillet
Height*
"FH"
Fillet
Diameter*
"FD"
Est.
Burn*
Off
1/4.2501.1251.25.093.359.125
5/16.3121.2501.5.109.437.125
3/8.3751.501.5.109.500.125
7/16.4371.6251.625.125.578.125
1/2.5001.7501.750.156.627.125
5/8.6251.8752.187.796.187
3/4.7502.753.250.937.187
7/8.8753.503.375.3121.093.187
114.5N/A.3751.2.250
* Approximate values
Other sizes available.
Contact us if you have a special requirement.

Material

 Low Carbon SteelStainless Steel
Material:ASTM A108
C1010-C1020
C-0.23% max; P-0.04% max
MN-0.90% max; S-0.05% max
ASTM A276

302HQ/304/304L STANDARD
18-8
Mechanical
Properties:
Min. Tensile Type A .....61,000 psi (420 Mpa)
Min. Yield Type
A .....49,000 psi (340 MPa)
Min. Tensile Type
B .....65,000 psi (450 MPa)
Min. Yield Type
B .....51,000 psi (340 MPa)
Other Grades Available Upon Request
Plating: Available As Special RequestPlating Does Not Apply To Stainless Steel
Annealing: Studs Are Annealed Where Required

DOWNLOADS

 

Data Sheet - Arc Studs - Bent No Thread

Ferrules