Fastening Technology

ARC Studs

Annular Ring (Navy Stud)

Base
Diameter
"BD"
Minimum
Length
"L"
Annular
Ring
"RD"
Ring
Length*
"RL"
Fillet
Height*
"FH"
Fillet
Diameter*
"FD"
Est.
Burn*
Off
.1881.00.175.312.109.359.125
* Approximate values
Other sizes available.
Contact us if you have a special requirement.

Material

 Low Carbon SteelStainless Steel
Material:ASTM A108
C1010-C1020
C-0.23% max; P-0.04% max
MN-0.90% max; S-0.05% max
ASTM A276

302HQ/304/304L STANDARD
18-8
Mechanical
Properties:
Min. Tensile Type A .....61,000 psi (420 Mpa)
Min. Yield Type
A .....49,000 psi (340 MPa)
Min. Tensile Type
B .....65,000 psi (450 MPa)
Min. Yield Type
B .....51,000 psi (340 MPa)
Other Grades Available Upon Request
Plating: Available As Special RequestPlating Does Not Apply To Stainless Steel
Annealing: Studs Are Annealed Where Required
CONTINENTAL Arc Studs are sold in "before weld" lengths and are aluminum flux loaded.
Ferrules are available for welding to flat surfaces, inside angles, outside angles and thru deck.
Please specify your application when ordering studs.

DOWNLOADS

 

Data Sheet - Arc Studs - Annular Ring (Navy Stud)

Ferrules