All information conatained herein is subject to change without notice.
For more information-consult your nearby Continental Field sales representative.

ARC STUDS

MATERIAL:
LOW CARBON STEEL
C - 0.23% max. P - 0.04% max.
Mn - 0.90% max. S - 0.05% max.
STAINLESS STEEL
AISI Grade - 304/305 std.
Other grades available upon request
MECHANICAL
PROPERTIES: 		Tensile ................. 60,000 psi (min.)
Yield ...................... 50,000 psi (min.)
Elongation ........... 20% (in 2 inches) 		Values for various grades available
upon request.
PLATING: Copper plating is standard. Does not apply to Stainless.
ANNEALING: Studs are annealed where required. Studs are annealed where required.
FERRULES: Ferrules are component parts of studs. Not sold separately.
TO ORDER OR SPECIFY GIVE:
1. Diameter   D
2. Length   L
3. Material
FULL THREAD
Picture
Picture
STUD
D
MIN
L
FD
FH
FERRULE
CODE
#10
3/4*
.281
.093
FB3
1/4
3/4*
.359
.109
FB4
5/16
3/4*
.437
.109
FB5
3/8
3/4*
.500
.125
FB6
7/16
7/8
.578
.140
FB7
1/2
7/8
.625
.156
FB8
5/8
1-1/8
.796
.187
FB10
3/4
1-1/8
.937
.250
FB12
7/8
1-1/2
1.093
.312
FB14
THREADS: Standard thread is UNC-2A (Rolled when possible), other threads are available upon request. Maximum' standard thread length is 3-7/8".
*Ferrules used when Studs 3/4" long are special "short F" ferrules
† KNOCK-OFF studs are available if shorter lengths are required.
FERRULE
CODE
B
D
E
M
A
C
FB3
.305
.390
.125
.250
.202
.262
FB4
.380
.455
.156
.390
.260
.330
FB5
.445
.578
.156
.390
.322
.406
FB6
.505
.640
.156
.390
.385
.468
FB7
.585
.703
.188
.422
.447
.546
FB8
.650
.795
.188
.438
.510
.603
FB10
.785
1.030
.188
.516
.635
.765
FB12
1.030
1.218
.188
.656
.760
.897
FB14
1.203
1.406
.188
.732
.890
1.046
Picture