All information conatained herein is subject to change without notice.
For more information-consult your nearby Continental Field sales representative.

INSUL-ANCHORS

APPLICATION
Picture

1. Wipe surface clean.

Anchor must be applied to a clean, dry, nonpainted surface.

2. Apply adhesive to anchor.

Spread a daub of General Purpose Adhesive on to the perforated base with a putty knife.

3. Or ... Apply adhesive to anchor.

Or ... cover the perforated base with General Purpose Adhesive from a caulking gun.

Picture

4. Stick anchor in place.

Press anchor into position with a twisting motion to assure an even spread of adhesive. The adhesive should protrude through the perforations and beyond the edges of the base.

Picture

5. Hang insulation.

NOTE: ALLOW ADHESIVE TO DRY THOROUGHLY before hanging insulation, usually 24-48 hours. Drying times vary with temperature.

6. Secure with washer.

Secure insulation in place with a self-locking washer and then bend over or clip off the spindle.