All information contained herein is subject to change without
notice.
For more information-consult your nearby Continental Field sales representative.
DESCRIPTION
The ARC-3000 is a fully regulated stud welding power supply that is available in a single or dual gun version. Both versions have the constant output feature that allows the unit to be used as a power source that can operate external stud welding control units. An added feature in the ARC-3000 is the ability to dial in the desired weld time and weld current before even making a weld. By selecting the setup mode, the weld time and current can be adjusted and displayed on the front panel digital meters.
A specially designed electronic gun control circuit has been Incorporated Into the system. If a fault condition occurs due to a shorted gun solenoid or a faulty control cable, the circuit will prevent gun retriggerlng and eliminate damage to printed circuit boards. The ARC-3000 system is capable of welding studs from 1/4" diameter to 1-1/4" diameter with preciseness and repeatability.
|
DIMENSIONS:
|
36" H x 28" W x 40" D
|
| OUTPUT | 3000 AMPS @ 44 VDC |
| WEIGHT: | 950 LBS. |
| INPUT: | 230/460/575 VAC |
| FUSING: | 400/200/180 DELAY TYPE 3 PHASE/60 CYCLE |
| TIME CONTROL | STEPLESS ADJUSTABLE. 1-L8 SEC. |
| CURRENT CONTROL: | .STEPLESS ADJUSTABLE 400 - 3000 AMP |
| DUTY CYCLE: |
1/4 - 3/8 UNLIMITED 1/2" 60/MIN 5/8" 30/MIN 3/4"20/MIN 7/8" 15/MIN |
|
COMPONENTS
|
|||
|
DESCRIPTION
|
PART NO.
|
DESCRIPTION
|
PART NO.
|
|
SYSTEM SINGLE
|
100-0207S
|
GROUND CABLE
|
|
|
DUAL
|
100-0207D |
25'x 4/0 WELDGUN
|
125-0110 300-0601
|
|
POWER SUPPLY SINGLE:
|
200-0016
|
COMBO CABLE
|
|
| DUAL: | 200-0017 | 50 FT. x 4/0 | 125-1002 |
 |
||||||||||||
|
||||||||||||
PRO WELD ARC-3000