All information contained herein is subject to change without
notice.
For more information-consult your nearby Continental Field sales representative.
DESCRIPTION
The ARC-1850 is a fully regulated stud welding power supply that is available In a single or dual gun version. Both versions have the constant output feature that allows the unit to be used as a power source that can operate external stud welding control units. Stick welding and Arc air gouging processes are available only as an option. An added feature in the ARC-1850 Is the ability to dial in the desired weld time and weld current before even making a weld. By selecting the setup mode, the weld time and current can be adjusted and displayed on the front panel digital meters.
A specially designed electronic gun control circuit has been Incorporated
Into the system. If a fault condition occurs due to a shorted gun solenoid
or a faulty control cable, the circuit will prevent gun retriggering and eliminate
damage to printed circuit boards.
|
DIMENSIONS:
|
26"H x 24"W x 33"D
|
| OUTPUT | 1850 AMPS @45 VDC |
| WEIGHT: | 500 LBS. |
| DUTY CYCLE: | 12 GA- 5/8" UNLIMITED 3/4" 10/MIN. 7/8" 4/MIN. |
| INPUT: | 230/460/575 VAC 3 PHASE 60Hz |
| FUSING: | 200/100/90 DELAY TYPE |
| TIME CONTROL: | .STEPLESS ADJUSTABLE .1- 1.6 SEC. |
| CURRENT CONTROL: |
STEPLESS ADJUSTABLE 100 - 1900 AMP |
|
COMPONENTS
|
|||
|
DESCRIPTION
|
PART NO.
|
DESCRIPTION
|
PART NO.
|
|
SYSTEM SINGLE
|
100-0210S
|
GROUND CABLE
|
125-0104 |
|
DUAL
|
100-0210SD |
25'x 4/0 WELDGUN
|
300-0600
|
|
POWER SUPPLY SINGLE:
|
200-0022
|
COMBO CABLE
|
125-1000
|
| DUAL: | 200-0022 | 50 FT. x 4/0 | |
 |
||||||||||||
|
||||||||||||
PRO WELD ARC-1850