All information contained herein is subject to change without notice.
For more information-consult your nearby Continental Field sales representative.

Solid State Welding System
The AGM Model PA-15 Welding System is a versatile, solid state, portable pin and stud welding system designed for a variety of fastening applications. It was developed for welding 14 Ga. CD pins through 3/ 8 CD studs, including Cup Head Pins, onto a metallic surface through the use of initial contact Capacitor Discharge (CD) welding. This unit will also weld double pointed pins. The welding system consists of a power pack, a lightweight weld gun, gun lead extension and ground lead, complete with a ground clamp.

The system is capable of making up to 16 welds per minute to low carbon, stainless and galvanized steel, as well as to many aluminum and copper alloys. The power pack provides the source of energy and all the necessary controls for the welding process. It also has a circuit to automatically discharge the weld capacitors through a resistor when the AC line switch is placed in the “OFF” position.

The weld gun has a contoured, pistol shaped handle with a trigger button. As a safety feature AGM CD welding systems are designed so that the stud or pin must be in contact with the work piece before the weld cycle can be actuated.

When used with AGM pins or studs, this system is a most valuable and economical tool, and is suited for most commercial and industrial applications.

 
Model PA-15

 

 

 

AGM MODEL PA-15

For Welding:
Cup Head Pins
CD, PowerbaseŽ & Double Pointed Pins
Threaded Studs, up to 3/8-16 Dia (M10)*
 
FEATURES
• Solid state circuitry
• Built-in circuit breaker
• Weld ready light
• Lightweight power pack
• Lightweight gun

Welder Spec: spacer Weld Gun Spec:
Construction 16 ga. Fabricated Steel Type Pistol Grip
Dimensions 18”L x 9 1/2”W x 9 1/2” H Mode Contact
Weight 51 lbs. Weight 2 lbs
Capacitance 152,000 MFD Dimensions 8.5" x 2"
Input Voltage 120 VAC, 60 Hertz, 15 Amp. Feed Manual
Weld Voltage 100-220 VDC  
Weldable Pins 14 ga. to Cup Head Pins Accessories
Weldable Studs Up to 3/8-16 (M10)
Aluminum Studs 5/16-18 (M8*)		 Gun Lead
Ground		 24 ft. long
26 ft. long
Weld Rate 16 Welds per min. (based on diameter)  
Shipping Weight 71 lbs. (complete system)
Construction: 16 ga (1.52mm) Fabricated Steel
Dimensions: 16" (406.4mm) Lx 9 5/8" (244.5mm) W
  x 71/4" (184.2mm) H
Weight: (including gun & cables) 65 lbs. (29.5 Kg.)
   
Input Voltage: 208-240 VAC. 60 Hertz, 1 phase, 30 Amp
Weld Voltage: 7.5 VAC OPEN CIRCUIT
Line Cord: 7 ft. (2.13m) of 12/3 cord w/4 prong 30 amp
  Twist-Lock plug
Weldable Pin Dia: 14 ga (2.03 mm) straight & 9 ga (3.76 mm)
  cupped head resistance weld pin
Weldable Base Metal Thickness 24 ga (0.7 mm) & thinner
  (Aluminum Studs #10 (M5) Flanged Maximum)
Weld Rate:  8-12 per min, continuous (based on pin diam.)
  Faster rates possible for short durations.