All information contained herein is subject to change without notice.
For more information-consult your nearby Continental Field sales representative.

Stud Welding Systems with Microcomputer Control for Capacitor Discharge Welding

Features:
 
- Microcomputer Control : 8 programs can be stored ( charging voltage ).  Library with stored welding parameters.  Custom specific entries possible.  Menu in different languages.
-Process Sequence Control: Record and evaluation of influential factors during welding process via the Process-Analysis-Factor (PAF). After each weld, a comparison between measured and reference PAF value is carried out, Allowable tolerances to reference value can be preset.
-Function control: Automation function test of the power unit after switching on. Monitoring of internal unit functions. Lift test at gap welding guns and welding heads indication of failure and reasons on display.
Type CDM 1601 CDM 2401 CDM 3201
Welding range:
Dia. [mm]		 M3 to M8
dia. 2 to 8 mm		 M3 to M8 (M10)
dia. 2 to 10 mm		 M4 to M10
dia. 4 to 10 mm
Welding material: Mild steel, stainless steel, aluminum and brass
Welding rate
(Studs/min) :		 up to 40 studs/min . (depending on application and stud dia.)
Capacitance: 66.000 µF 99.000 µF/33.000 µF* 132.000 µF/99.000 µF*
Welding time: 1 to 3 msec.
Energy: 1.600 Ws 2.400 Ws/800 Ws* 3.100 Ws/1.600Ws*
Charging voltage: 50 to 220 V (stepless voltage regulation)
Power source: Capacitor
Primary power: 230/115 V, 50/60 Hz, 10 AT
Insulation class: IP 21
Dimensions [mm]:
L x W x H		 480 x 240 x 280 mm
(without handle)		 600 x 240 x 280 mm
(without handle)		 600 x 240 x 280 mm
(without handle)
Weight [kg]: 19 kg 26kg 27 kg

 

 

 

 

 

HBS CDM 1601, 2401 & 3201