All information contained herein is subject to change without
notice.
For more information-consult your nearby Continental Field sales representative.
- Cost-effective power unit for a wide range of capacitor discharge
studwelding applications (gap- and contact-welding)
- Especially suited for problematic surface e.G. galvanized sheets)
- Compact and very strong metal housing to withstand rough conditions on job
sites
- Protection for high voltage fluctuations (-25% up to 20%)
- For contact-welding use gun C 08, suitable for mild steel, stainless steel
- The gap-welding gun CA 08 is also suited for aluminium, brass and copper
- Easy to operate. Fine adjustment of charging voltage through arrow
keys (corresponds to energy setting)
- Library function, automatic preset of charging voltage by selection of the
stud metric diameter
- Self control increases electrical safety - Electronic protected solenoids
- Automatic switching off at overheating
- Easy control of all functions by LED indications
- Alternation of polarity can be done for extreme difficult materials
(normal is + ground, - gun)
| Type | CD 1501 | CD 2301 | CD 3101 |
|
Welding range: Dia. [mm] |
M3 to M8 dia. 2 to 8 mm |
M3 to M8 (M10) dia. 2 to 10 mm |
M4 to M10 dia. 4 to 10 mm |
| Welding material: | Mild steel, stainless steel, aluminum and brass | ||
|
Welding rate (Studs/min) : |
8 to 20 studs/min. (depending on application and stud dia.) | ||
| Capacitance: | 66.000 µF | 99.000 µF | 132.000 µF |
| Welding time: | 1 to 3 msec. | ||
| Energy: | 1.500 WS | 2.400 WS | 3.200 WS |
| Charging voltage: | 50 to 220 V (stepless voltage regulation up and down) | ||
| Power source: | Capacitor | ||
| Primary power: | 230/115 V, 50/60 Hz, 10 AT | ||
| Insulation class: | IP 23 | ||
|
Dimensions [mm]: L x W x H |
420 x 180 x 250 mm (without handle) |
510 x 180 x 250 mm (without handle) |
510 x 180 x 250 mm (without handle) |
| Weight [kg]: | 17 kg | 21 kg | 22 kg |
 |
HBS CD 2301 & 3101