All information contained herein is subject to change without
notice.
For more information-consult your nearby Continental Field sales representative.
- Cost-effective power unit for a wide range of capacitor discharge studwelding
applications (gap- and contact-welding)
- Especially suited for problematicsurface e.G. galvanized sheets)
- Compact and very strong metal housing to withstand rough conditions on job
sites
- Protection for high voltage fluctuations (-25% up to 20%)
- For contact-welding use gun PMK-20, suitable for mild steel, stainless steel
- The gap-welding gun PMH-10 is also suited for aluminium, brass and copper
- Easy to operate. Number of settingknob-scale indicates size of stud to be
welded (corresponds to energy setting)
- Stepless voltage regulation
- Self control increases electrical safety - Electronic protected solenoids
- Automatic switching off at overheating
- Easy control of all functions by LED indications
- Alternation of polarity can be done for extreme difficult materials (normal
is + ground, - gun)
|
Technical Data:
|
|
| Power source: | Capacitor discharge |
| Capacitance: | 66.000 uF |
| Energy: | 1500 Ws |
| Welding time: | 1 to 3 ms |
| Charging voltage: | 60 to 220 V (stepless voltage regulation) |
| Welding range: | .M3 to M8, dia. 2 to 8 mm |
| Welding material: |
Mild steel, stainless steel, aluminium and brass |
| Welding rate: | 8 to 20 studs/ min. (depending on application and stud dia.) |
| Primary power: | 230/115 V, 50/60 Hz, 10 AT |
| Insulation class: | IP 21 |
| Dimensions: | 380 x 180 x 250 mm (L x W x H) (without handle) |
| Weight: | 15 kg 33 lbs |
 |
HBS CD 1500