WELDPINS®
All information conatained herein is subject to change without
notice.
For more information-consult your nearby Continental Field sales representative.
DOUBLE POINTED (ARC)
WELDPIN®
|
TYPE
|
D*
|
L
|
FERRULE
CODE
|
|
10GA
|
.135
|
AS REQUIRED
|
DP10
|
| MATERIAL: | LOW CARBON STEEL C - 0.23% max. P - 0.04% max. Mn - 0.90% max. S - 0.05% max. |
STAINLESS STEEL |
| MECHANICAL PROPERTIES |
Tensile......... 55,000 psi (min.) Yield........... 50,000 psi (min.) Elongation.......20% (in 2 inches) |
Tensile . . . . . . . . . 85,000 psi (min.)
Yield . . . . . . . . . . . 50,000 ksi (min.) Elongation. . . . . . .60% (in 2 inches) |
| PLATING: | Copper coating is standard. |
Does not apply to Stainless. |
| ANNEALING: | Can be annealed if required. | Does not apply. |
|
CODE
|
B
|
D
|
E
|
A
|
C
|
|
DP10
|
.281
|
.375
|
.156
|
.154
|
.190
|
TO ORDER OR SPECIFY GIVE:
1. Diameter D
2. Length L
3. Material
APPLICATION: This is standard weldpin® used when only ARC stud welding equipment is available.
WASHERS: Self-locking washers are available in a variety of sizes, shapes, and materials.
FERRULES: Ferrules are component parts of studs. Not sold separately.
|
•
Other diameters available upon request
|