WELDPINS®
All information conatained herein is subject to change without
notice.
For more information-consult your nearby Continental Field sales representative.
WELDPIN®
|
SIZE
|
D
|
STEEL FD
|
ALUM.
FD
|
|
14GA
|
.080
|
.160 -
|
------
|
|
12GA
|
.105
|
.180
|
.230*
|
|
10GA
|
.135
|
.195
|
.250*
|
|
MATERIAL:
|
LOW CARBON STEEL C - 0.23% max. P - 0.04% max. Mn - 0.90% max. S - 0.05% max. |
STAINLESS STEEL 302HQ |
|
MECHANICAL
PROPERTIES |
Tensile . . . . . . . . . . 55,000 psi
(min.) Yield 50,000 psi (min.) Elongation 20% (in 2 inches) |
Tensile . . . . . . . . . 85,000 psi (min.)
Yield . . . . . . . . . . . 50,000 ksi (min.) Elongation. . . . . . .60% (in 2 inches) |
|
PLATING:
|
PLATING: Copper coating is standard on
pins. Copper and other platings available upon customers request. |
Does not apply to Stainless. |
|
ANNEALING:
|
Pins are annealed where required. | Does not apply. |
|
MATERIAL
|
ALUMINUM Alloy - 1100 H-18 Other alloys available upon request. |
|
MECHANICAL
PROPERTIES: |
Values for various alloys available upon request. |
TO ORDER OR SPECIFY GIVE:
1. Diameter D
2. Length L
3. Material
APPLICATION: This is standard weldpin® used for
most applications.
WASHERS: Self-locking washers are available in a variety of sizes,
shapes, and materials.
|